I have this issue on all neck accessories, diamond chokers, collars, etc. The mannequin just clips with everything that sits around the neck, it doesn't have to be a skintight accessory. I think the mannequin needs checked for compatibility as far as the neck. None of these images display my accessory correctly at all. :S
0 Votes
18 Comments
Sorted by
Recent
Past
Popular
Recent
C
Communityposted
7 months ago
Admin
Posted by “Lovestory” on January 29, 2023.
[Archived]
Excited! Thanks for considering! ♥
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “LestatDeLioncourt” on January 28, 2023.
[Archived]
It may work well if allowed on some products :D
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “LestatDeLioncourt” on January 28, 2023.
[Archived]
Oh, wow. Tomorrow, I have time to see these. The Thumbs were really bad. Thank
you for the change.
BTW, I LOVE LOVE the Idea of reverse material skinned or invisible mannequins.
10 upvotes !!!
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “MightySe7en” on January 27, 2023.
[Archived]
The male fingers were made slightly thinner and it seemed like the rings looked a bit better. There will be more experiments over time to really make sure the hands work well with more products
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “LestatDeLioncourt” on January 27, 2023.
[Archived]
If they were to reverse the material on the mannequins it would solve most all problems... The inside of the skin would be visible and the outside, not.
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “LestatDeLioncourt” on January 27, 2023.
[Archived]
How did the Fingers look with most rings ?
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “MightySe7en” on January 26, 2023.
[Archived]
This would be an interesting idea to experiment with. I will let you know if we add this to the image picker!
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “Lovestory” on January 26, 2023.
[Archived]
I understand completely. There are many body types and although all of them are based off of the default avatar, most of them have completely different proportions. Might I suggest something? An "invisible" mannequin may solve all the problems of clipping as far as niche accessories are concerned. If not then it was just a thought. Thanks again regardless!
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “MightySe7en” on January 26, 2023.
[Archived]
Hi @Lovestory!
The mannequin is based off the base avatar since that is the one everyone has by default. Sadly there is no single mannequin that will make every product look good but we are constantly trying to tweak the current one to work in the most cases. Ill keep this in mind and see if we are able to make that change. Thanks for bringing this style of product up to me! Ill see what I can do
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “Lovestory” on January 26, 2023.
[Archived]
@MightySe7en Hi! Just a small collarbone clipping with pendants now. It gets buried in the upper collarbone/chest. I added a side view in a TPose just so you can see how much a difference between an updated avatar body and the mannequin.
Cheers ♥
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “LestatDeLioncourt” on January 19, 2023.
[Archived]
Thank you sir.
They should work with most any rings in the catalog if the circumference of the finger are reduced a bit.
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “MightySe7en” on January 19, 2023.
[Archived]
I will give them both a look tomorrow! As long as they do not look out of place and still work with other ring and hand products, I imagine it will be a quick fix
0 Votes
C
Communityposted
7 months ago
Admin
Posted by “LestatDeLioncourt” on January 19, 2023.
Posted by “Lovestory” on January 18, 2023.
[Archived]I have this issue on all neck accessories, diamond chokers, collars, etc. The mannequin just clips with everything that sits around the neck, it doesn't have to be a skintight accessory. I think the mannequin needs checked for compatibility as far as the neck. None of these images display my accessory correctly at all. :S
0 Votes
18 Comments
Community posted 7 months ago Admin
Posted by “Lovestory” on January 29, 2023.
[Archived]Excited! Thanks for considering! ♥
0 Votes
Community posted 7 months ago Admin
Posted by “LestatDeLioncourt” on January 28, 2023.
[Archived]It may work well if allowed on some products :D
0 Votes
Community posted 7 months ago Admin
Posted by “LestatDeLioncourt” on January 28, 2023.
[Archived]Oh, wow. Tomorrow, I have time to see these. The Thumbs were really bad. Thank
you for the change.
BTW, I LOVE LOVE the Idea of reverse material skinned or invisible mannequins.
10 upvotes !!!
0 Votes
Community posted 7 months ago Admin
Posted by “MightySe7en” on January 27, 2023.
[Archived]The male fingers were made slightly thinner and it seemed like the rings looked a bit better. There will be more experiments over time to really make sure the hands work well with more products
0 Votes
Community posted 7 months ago Admin
Posted by “LestatDeLioncourt” on January 27, 2023.
[Archived]If they were to reverse the material on the mannequins it would solve most all problems... The inside of the skin would be visible and the outside, not.
0 Votes
Community posted 7 months ago Admin
Posted by “LestatDeLioncourt” on January 27, 2023.
[Archived]How did the Fingers look with most rings ?
0 Votes
Community posted 7 months ago Admin
Posted by “MightySe7en” on January 26, 2023.
[Archived]This would be an interesting idea to experiment with. I will let you know if we add this to the image picker!
0 Votes
Community posted 7 months ago Admin
Posted by “Lovestory” on January 26, 2023.
[Archived]I understand completely. There are many body types and although all of them are based off of the default avatar, most of them have completely different proportions. Might I suggest something? An "invisible" mannequin may solve all the problems of clipping as far as niche accessories are concerned. If not then it was just a thought. Thanks again regardless!
0 Votes
Community posted 7 months ago Admin
Posted by “MightySe7en” on January 26, 2023.
[Archived]Hi @Lovestory!
The mannequin is based off the base avatar since that is the one everyone has by default. Sadly there is no single mannequin that will make every product look good but we are constantly trying to tweak the current one to work in the most cases. Ill keep this in mind and see if we are able to make that change. Thanks for bringing this style of product up to me! Ill see what I can do
0 Votes
Community posted 7 months ago Admin
Posted by “Lovestory” on January 26, 2023.
[Archived]@MightySe7en Hi! Just a small collarbone clipping with pendants now. It gets buried in the upper collarbone/chest. I added a side view in a TPose just so you can see how much a difference between an updated avatar body and the mannequin.
Cheers ♥
0 Votes
Community posted 7 months ago Admin
Posted by “LestatDeLioncourt” on January 19, 2023.
[Archived]Thank you sir.
They should work with most any rings in the catalog if the circumference of the finger are reduced a bit.
0 Votes
Community posted 7 months ago Admin
Posted by “MightySe7en” on January 19, 2023.
[Archived]I will give them both a look tomorrow! As long as they do not look out of place and still work with other ring and hand products, I imagine it will be a quick fix
0 Votes
Community posted 7 months ago Admin
Posted by “LestatDeLioncourt” on January 19, 2023.
[Archived]Can this be done for Male Fingers? Many rings show buried into the finger and do not show on the hands properly. Some Rings to play with are... These...
If I back up a step... most all men wear non-flintstone hands. Most men's hands conform to these or very similar... Other men's hands that are in high population and most similar to these.
This would be most awesome.
Female Fingers could probably use a trim, too... :D
0 Votes
Community posted 7 months ago Admin
Posted by “Lovestory” on January 19, 2023.
[Archived]@MightySe7en You're awesome! That is so much better, thank you! ♥
0 Votes
Community posted 7 months ago Admin
Posted by “MightySe7en” on January 18, 2023.
[Archived]Yep! We made sure to have the ability to help creators as quickly as possible so your products can ✨Shine ✨
0 Votes